Cheetah Mounts APSAMB Tilt and Swivel Articulating Arm for Plasma LCD TV 32″-55″
Monday, February 08th, 2010 | Author: admin
- Collapses to less than 4″ from the wall
- Extends to a full 26″ from the wall
- High quality powder coat end
- Built-in bubble level in wall plate
- Dual safety screws to lock TV Position
Product Description
The APSAM universal articulating arm mount supports virtually any show up to 55″ with hole patterns up to 27.7″ horizontally and 19″ vertically. The APSAM also features a full 27″ of extension and up to 150 degrees of rotation for larger displays, it also folds to a low 3.5″ profile as has +/-15 degrees of tilt. The APSAM mount is designed with a lift and lock design for ease of installation and is constructed with a 17″ wall plate which is specifically designed … More >>
Cheetah Mounts APSAMB Tilt and Swivel Articulating Arm for Plasma LCD TV 32″-55″
Category: Panasonic TV deals
|



I bought this mount for a 32in Phillips flatscreen. The mount is heavy, sturdy and exactly what I was looking for. The only problem was the mounting hardware that came with it. The wall anchors were cheap and did not hold in the wall very well. This was a honestly simple fix by a trip to the local hardware. Then another surprise, the screws that were sent to attach the TV to the mount were not the right size. This resulted in another trip to the hardware. Now another issue. The only screws that would fit the TV screw holes were too small. Now I had to shorten the plastic mounting spacers that came with the unit. Excellent thing I have a bench grinder. A small adjustment to the length and they all screwed in fine.
Overall this is a fantastic mount. You can’t beat the price. It sits level, even at an angle in a corner. It is solid and heavy. I don’t have to worry about the TV falling off the wall or the mount. But a word of advice. Be prepared to go to the hardware for more mounting anchors and screws. (In my opinion 4 were not enough.) Also check the screws and spacers before putting the TV up on the mount. It will save you a few headaches and a trip or two to the hardware.
Rating: 4 / 5
I originally bought this mount and had to return it due to issues with my wall studs… I contacted them via their cusomter service line and was helped immediately by someone who gave me clear instructions for returning the unit and choosing the right one. They even shipped out the new unit early (when I sent them the tracking number) and refunded the difference in orders promptly. I wouldn’t hesitate to order from them again.
PS – New mount is awesome!Cheetah Mounts APTMMB Tilt Wall Mount for 32″-55″ Plasma and LCD Displays
Rating: 5 / 5
Super heavy and sturdy. Have had it outside for four months now and no complaints. For $105 delivered a fantastic deal. Not a five star due to slight lean to the right, but not really noticeable. Probably a common problem with a lot of mounts. Fantastic deal.
Rating: 4 / 5
With the exception of the fact that you need to buy 20′ cables vs. 10′ cables so that it can really extend, its fantastic. The extra cost of the cables is not a huge deal if you get online. The complaint I heard was that it stuck off the wall more than the flush mount one. But to me it was worth being able to go the TV around the room. Have plenty of zip ties to make the cable snake along the arm. Install tip, choose how you will view tv, on the wall flush or extended. It is not possible to have both positions 100% level (if you even care, it is still between the lines on the bubble level)
Would buy again.
Rating: 5 / 5
Very excellent quality mount(especially for the price) Have not experienced any “sag” and have a 46″ LCD setting on it. Only problem was one mounting screw was the incorrect size.
Rating: 4 / 5